Skip to content
FleetFloor

For towing companies running 3 to 15 trucks

Know what the job costs before you quote it.

Every truck has a floor. Price above it. See what you actually keep.

FleetFloor works out what each truck costs to run from the bills you already pay, prices every job against it, checks whether a motor club rate covers the call, and keeps the history so you can see which trucks and customers make money.

$297 a month. Cancel any time. Or get the free cost sheet

numbers you already have
6
floor under every truck
1
fields to price a job
3
Job ticket

Suggested quote

$1,875

Your floor $1,618 + 15% profit, rounded up to $25.

PassClears your floor: covers every cost in it

Fuel
$252.83
Wear and repairs
$151.36
Driver time
$746.67
Share of monthly bills
$191.67
Tolls
$275.00
Your floor
$1,617.53
Use your own truck
How is this calculated?

Fuel is loaded miles plus empty miles, divided by the truck’s mpg, times today’s diesel price.

Wear and repairs is last year’s repair and tire bill divided by last year’s miles, times the miles on this job.

Driver time is the driver wage, times a risk premium for carrying the liability, divided by the share of the day the truck can actually bill. If it works ten hours and invoices six, every invoiced hour has to pay for the other four.

Share of monthly bills is insurance, truck payment and the rest, divided by the jobs the truck runs in a month.

Add tolls. That total is your floor. The quote is the floor plus your profit margin, rounded up so it looks clean. In motor club mode we skip the quote and show what’s left of their rate after cash costs and overhead.

Live sample truck. Change any number. Sign in and it uses yours.

What it does

Know the truck. Price the job. Log what happened. See what pays.

Four screens, one loop. Every job you save makes the next quote better informed.

  1. 1Each truck's floor

    Fuel, wear, the driver's hours and the monthly bills, from paper you already have.

    Fuel, 60 mi
    $41.00
    Wear and repairs
    $24.55
    Driver time, 2.5 h
    $186.67
    Share of bills
    $191.67
    Your floor
    $443.88
  2. 2Price the job above it

    Pick the truck, enter the trip. The quote is the floor plus your profit, rounded up.

    Your quote

    $525

    Floor $444 + 15% profit, rounded up to $25.

    CloseCovers costs, short of minimum profit

  3. 3Check the club's rate

    When Agero, Quest or Urgent.ly sets the price, see whether it covers the call before you roll.

    Their price vs your floor

    $95 vs $148

    FailLoses money

    Cash in hand, but $53 short of the truck’s costs.

  4. 4See what pays

    Mark each job won, lost or paid. The pattern shows which trucks, customers and contracts clear the floor.

    Rotator
    96% cleared
    Rollback 1
    96% cleared
    Light wrecker 2
    12% cleared

    Light wrecker 2 runs the club calls.

Example numbers from a sample account. Yours come from your own bills.

Try it with sample data

Click around a real account.

No video, no sales call. Open a towing company with five trucks, three contracts and two months of jobs already in it, and use it like it’s yours.

  • Price a jobPick a truck, enter the miles and hours, and see the floor, the quote and what you keep.
  • Check a motor club rateRun an Agero call on the light wrecker and see whether $95 covers the truck.
  • See the patternTwo months of jobs, grouped by truck, customer and contract. Which ones clear the floor?

Open the live demo

A real account with sample trucks and jobs. No sign-up, no password.

We’ll send nothing unless you ask. Sample data resets daily.

What it shows you

The numbers nobody hands you.

Three things an operator should know before saying yes to a job. FleetFloor works them out from the paper on your desk and shows its working.

$0.41per mile

Your real cost per mile

Nobody knows their maintenance cost per mile. You do know what repairs and tires came to last year and how many miles you ran. We do the division and show the working.

Repairs and tires last year ÷ miles run last year

10 hbecomes $747

Driver hours are a cost

Quoting, waiting, wrenching, driving empty. The hours nobody invoices still get paid, so the invoiced ones have to carry them. Skip this and you routinely under-quote by a third or more.

Driver wage × risk premium ÷ share of the day that gets invoiced

$78kept on a $250 call

Does the motor club rate cover the call?

Enter Agero's, Quest's or Urgent.ly's rate and see what you keep per call, per truck. A route can put cash in hand and still not cover the driver's hours and the truck's overhead.

Keep your dispatch software

Towbook tells you where the truck is. This tells you whether the job was worth taking.

It sits next to what you use now. Nothing to switch.

How it works

Three steps. No spreadsheet.

The first is six numbers you already have, the second is a few fields per job, the third takes care of itself.

  1. Step 1

    Add a truck

    Six numbers you already have:

    • Today's diesel price
    • How far a tank goes
    • Last year's repairs and tires
    • Monthly bills for the truck
    • Driver wage
    • What the truck needs to earn
    The add-a-truck form in FleetFloor: fuel price, tank range, last year's repairs, monthly bills, driver wage
  2. Step 2

    Price a job

    Pickup, drop-off, hours, tolls. Get the floor, a quote, and what you keep. If a motor club or broker is setting the price, see whether their number clears the floor before you say yes. Save it, and later mark it won, lost or paid.

    The price-a-job screen: loaded miles, empty miles, hours and tolls with the floor, quote and what you keep
  3. Step 3

    See the pattern

    Which trucks, customers and contracts clear your floor, and which never did. Sort it, filter it, export it.

    The pattern report: jobs grouped by truck and customer with share above floor and revenue below floor

Built by an operator

Built by an operator, not a software company.

I run Marmik Towing & Transport out of Royersford, PA. I built this because I costed my own truck to the penny and found out I’d been quoting under my floor for years without knowing it. Every question in here is one I could answer about my own truck from the bills on my desk.

Mark WilliamsOwner, Marmik Towing & Transport, Royersford PA
The whole story
Mark Williams smiling from the cab of a white Marmik Towing & Transport truck with the gold winged M on the door
Mark Williams, Marmik Towing & Transport, Royersford PA

Free cost sheet

Cost your truck on one page. Free sheet.

The six numbers, the arithmetic, and a floor for one truck. Print it, fill it in with a pen, and you’ll know more about your pricing than most of the operators you compete with.

  • Works for a flatbed, a wrecker, a box truck or a tractor
  • The same arithmetic the app uses
  • One page. Prints on Letter or A4

Send me the sheet

One page, by email. Free.

How many trucks do you run?

No spam. One email with the sheet, then you’re off the list unless you say otherwise.

Questions

Questions operators ask

Anything else, email Mark at mark@fleetfloor.co.

I already have Towbook or dispatch software. Is this a replacement?

No. Dispatch tells you where the truck is and who's on the call. FleetFloor tells you whether the call was worth taking. You keep your dispatch software; this sits next to it.

I don't know my maintenance cost per mile.

Nobody does. You know what repairs and tires came to last year, and roughly how many miles you ran. Divide one by the other and that's your cost per mile. FleetFloor does the division and shows you the working.

Does it handle motor club rates like Agero, Quest and Urgent.ly?

Yes. Save each club's rate card once. When you price a call, pick the club and FleetFloor shows what you keep after fuel, wear, your hours and the truck's share of the monthly bills, and whether that clears your floor.

Does it connect to Towbook or QuickBooks?

Not yet. A Towbook import and a QuickBooks export are on the roadmap. Today you enter jobs by hand, a few fields per job, and you can export everything as CSV.

Where does my data go? Who can see it?

Your numbers are stored in a database that only your company's logins can read. Nobody else can see your costs or your jobs. If enough operators opt in, we publish regional averages, but never for fewer than five companies and never in a way that identifies anyone. You can opt out in settings.

What if I run 3 trucks? Or 40?

It works for any size. It's built around the problems of a 3 to 15 truck shop: real operating history, recurring work, contracts and drivers, enough going on that the truck-level numbers matter. With one truck you'll still learn something; with forty you'll want the reports.

What does it cost?

One plan: $297 a month for full access. No setup fee. Month to month, cancel any time. Yearly, you pay for 10 months and get 12. The founder-led audit and onboarding, where Mark sets your account up with you, is normally $2,000 on top; the first 10 Foundation Customers get it credited in full. See the pricing page for the guarantee.

Know your floor before you quote the next job.

Add one truck from the bills you already pay. Ten minutes, and every quote after that starts from a real number.

Or try the live demo first. No sign-up needed.